Our Igniter Products
Selecting Our Igniters
Select your new igniter by comparing the one you want to replace with the photos of igniters below. If you know the manufacturer's name and part number of the igniter you want to replace, you can also use our Igniter Replacement Guide to help you select the appropriate igniter.
i360 Universal Igniter
| A universal replacement igniter kit for over 135 silicon carbide applications. The i360 connects to all 120 Volt HSI Ignition control modules. The i360 can be used in most gas furnace applications, some water heater applications and gas dryer applications. In many cases a mounting bracket is not necessary, but three common mounting brackets are provided with each i360 Igniter Kit for greater versatility. Cost: US $39.99 » BUY NOW In some cases, an additional specific bracket is required to suit a particular application. To find out if your application needs a specific mounting bracket, please go to our Igniter Replacement Guide and check the listing for your application. "+BR" in the right column means you need a specific bracket, and it tells you which one you need. You can order a specific mounting bracket alone or with an i360 Igniter Kit from our Mounting Brackets page. |
 Larger Image  i360 Universal Igniter |
i099 Igniter Kit
| An exact replacement for the Rheem Canada power vented water heater. This product was only manufactured and sold in Canada. The Igniter Kit comes complete with stainless steel shield, plug in connector and preassembled flame sensor mounting bracket. Cost: US $49.99 » BUY NOW |
 Larger Image  i099 Igniter Kit |
i106 Igniter Kit
| An exact replacement for GSW/John Woods and Giant power vented water heaters. Kit comes complete with stainless steel shield and insulated wire quick connects. Cost: US $49.99 » BUY NOW |
 Larger Image  i106 Igniter Kit |
i401 Igniter Kit
| An exact replacement for Robert Shaw 41-401, White Rogers 767A-356 and 767A-369 and Norton 271A and 271B. Commonly used for Amana furnace part number D99182, B1336102 and 10041601. Cost: US $39.99 » BUY NOW |
 Larger Image  i401 Igniter Kit |
i406 Igniter Kit
| An exact replacement for Robert Shaw 41-406, White Rogers 767A-374 and Norton 271Y. Commonly used but not restricted to Glowcore and Lochinvar Boilers. Cost: US $39.99 » BUY NOW |
 Larger Image  i406 Igniter Kit |
i408 Igniter Kit
| An exact replacement for Robert Shaw 41-408, White Rogers 767A-372 and Norton 271N. Commonly used for Rheem 62-22441-01 and 62-22868-82 and Starlite 11120-100-1085. Cost: US $39.99 » BUY NOW |
 Larger Image  i408 Igniter Kit |
i419 Igniter Kit
| An exact replacement for Robert Shaw 41-403, 41-404, 41-407 and 41-409, White Rogers 767A-370 and Norton 101M, 201M and 271M. Commonly used for Carrier furnaces part number LH33ZS001A, LH33ZS002, LH33ZS003 and LH33ZS004. Cost: US $39.99 » BUY NOW |
 Larger Image  i419 Igniter Kit |
i3400 Igniter Kit
| An exact replacement for the 24 volt Q3400A1024 Honeywell SmartValve hot surface pilot burner assembly. Kit comes complete with locking spring clip. Cost: US $56.99 » BUY NOW |
 Larger Image  i3400 Igniter Kit |
Specifications
| Time to reach 1800 deg F: (equal to 983 deg C) |
> 17 seconds @ 102 volts AC |
| |
| Current: | 3.3–4.2 amps @ 115 volts AC |
| |
| Normal Operating Voltage: | 115 volts AC |
| |
| Power Rating: | 350–550 watts |
| |
| International Certificate: | CSA |
| |
Shopping Cart
Click on the links below to view the contents of the shopping cart or to proceed directly to checkout.
2CheckOut.com
2CheckOut.com Inc. (Ohio, USA) is an authorized retailer for goods and services provided by The Igniter Source website.
Silicon Nitride
Silicon nitride are new unbreakable hot surface igniters (HSI) that have been designed to replace silicon carbide igniters, which are fragile and have a much shorter lifespan.
Mounting Brackets
In some cases, a specific mounting bracket is required to suit a specific application. In all cases, however, these additional brackets apply only to the i360 Universal Igniters. Other igniters do not require them.
Warning
Hot surface igniters should be used only in their prescribed applications. Any other use of these igniters is extremely unsafe and ill advised.
Warranty
Please visit our Warranty page for details of the 3-year manufacturer's warranty on our hot surface igniters and mounting brackets.
Copyright © 2007-2008 The Igniter Source, Inc. All Rights Reserved.